EIP-3540: EOF - EVM Object Format v1

EOF is an extensible and versioned container format for EVM bytecode with a once-off validation at deploy time.

Abstract

We introduce an extensible and versioned container format for the EVM with a once-off validation at deploy time. The version described here brings the tangible benefit of code and data separation, and allows for easy introduction of a variety of changes in the future. This change relies on the reserved byte introduced by EIP-3541.

To summarise, EOF bytecode has the following layout:

magic, version, (section_kind, section_size_or_sizes)+, 0, <section contents>

Motivation

On-chain deployed EVM bytecode contains no pre-defined structure today. Code is typically validated in clients to the extent of JUMPDEST analysis at runtime, every single time prior to execution. This poses not only an overhead, but also a challenge for introducing new or deprecating existing features.

Validating code during the contract creation process allows code versioning without an additional version field in the account. Versioning is a useful tool for introducing or deprecating features, especially for larger changes (such as significant changes to control flow, or features like account abstraction).

The format described in this EIP introduces a simple and extensible container with a minimal set of changes required to both clients and languages, and introduces validation.

The first tangible feature it provides is separation of code and data. This separation is especially beneficial for on-chain code validators (like those utilised by layer-2 scaling tools, such as Optimism), because they can distinguish code and data (this includes deployment code and constructor arguments too). Currently, they a) require changes prior to contract deployment; b) implement a fragile method; or c) implement an expensive and restrictive jump analysis. Code and data separation can result in ease of use and significant gas savings for such use cases. Additionally, various (static) analysis tools can also benefit, though off-chain tools can already deal with existing code, so the impact is smaller.

A non-exhaustive list of proposed changes which could benefit from this format:

• Including a JUMPDEST-table (to avoid analysis at execution time) and/or removing JUMPDESTs entirely.
• Introducing static jumps (with relative addresses) and jump tables, and disallowing dynamic jumps at the same time.
• Multibyte opcodes without any workarounds.
• Representing functions as individual code sections instead of subroutines.
• Introducing special sections for different use cases, notably Account Abstraction.

Specification

The key words “MUST”, “MUST NOT”, “REQUIRED”, “SHALL”, “SHALL NOT”, “SHOULD”, “SHOULD NOT”, “RECOMMENDED”, “NOT RECOMMENDED”, “MAY”, and “OPTIONAL” in this document are to be interpreted as described in RFC 2119 and RFC 8174.

In order to guarantee that every EOF-formatted contract in the state is valid, we need to prevent already deployed (and not validated) contracts from being recognized as such format. This is achieved by choosing a byte sequence for the magic that doesn’t exist in any of the already deployed contracts.

Remarks

If code starts with the MAGIC, it is considered to be EOF formatted, otherwise it is considered to be legacy code. For clarity, the MAGIC together with a version number n is denoted as the EOFn prefix, e.g. EOF1 prefix.

EOF-formatted contracts are created using new instructions which are introduced in a separate EIP.

The opcode 0xEF is currently an undefined instruction, therefore: It pops no stack items and pushes no stack items, and it causes an exceptional abort when executed. This means legacy initcode or already deployed legacy code starting with this instruction will continue to abort execution.

Unless otherwised specified, all integers are encoded in big-endian byte order.

Code validation

We introduce code validation for new contract creation. To achieve this, we define a format called EVM Object Format (EOF), containing a version indicator, and a ruleset of validity tied to a given version.

Legacy code is not affected by EOF code validation.

Code validation is performed during contract creation, and is elaborated on in separate EIPs. The EOF format itself and its formal validation are described in the following sections.

Container specification

EOF container is a binary format with the capability of providing the EOF version number and a list of EOF sections.

The container starts with the EOF prefix:

The EOF prefix is followed by at least one section header. Each section header contains two fields, section_kind and either section_size or section_size_list, depending on the kind. section_size_list is a list of size values when multiple sections of this kind are allowed, encoded as a count of items followed by the items.

The list of section headers is terminated with the section headers terminator byte 0x00. The body content follows immediately after.

Container validation rules

1. version MUST NOT be 0.
2. section_kind MUST NOT be 0. The value 0 is reserved for section headers terminator byte.
3. There MUST be at least one section (and therefore section header).
4. Stray bytes outside of sections MUST NOT be present. This includes trailing bytes after the last section.

EOF version 1

EOF version 1 is made up of several EIPs, including this one. Some values in this specification are only discussed briefly. To understand the full scope of EOF, it is necessary to review each EIP in-depth.

Container

The EOF version 1 container consists of a header and body.

container := header, body
header := 
    magic, version, 
    kind_type, type_size, 
    kind_code, num_code_sections, code_size+,
    [kind_container, num_container_sections, container_size+,]
    kind_data, data_size,
    terminator
body := types_section, code_section+, container_section*, data_section
types_section := (inputs, outputs, max_stack_height)+

note: , is a concatenation operator, + should be interpreted as “one or more” of the preceding item, * should be interpreted as “zero or more” of the preceding item, and [item] should be interpeted as an optional item.

Header

(*) For not yet deployed containers this can be greater than the actual content length.

Body

See EIP-4750 for more information on the type section content.

NOTE: A special value of outputs being 0x80 is designated to denote non-returning functions as defined in a separate EIP.

EOF version 1 validation rules

The following validity constraints are placed on the container format:

• version must be 0x01
• types_size is divisible by 4
• the number of code sections must be equal to types_size / 4
• the number of code sections must be greater than 0 and not exceed 1024
• code_size may not be 0
• the number of container sections must not exceed 256. The number of container sections may not be 0, if declared in the header
• container_size may not be 0
• data section is mandatory, but data_size may be 0
• data body length may be shorter than data_size for a not yet deployed container

Changes to execution semantics

For an EOF contract:

• Execution starts at the first byte of code section 0
• CODESIZE, CODECOPY, EXTCODESIZE, EXTCODECOPY, EXTCODEHASH, GAS are rejected by validation in EOF contracts, with no replacements
• CALL, DELEGATECALL, STATICCALL are rejected by validation in EOF contracts, replacement instructions to be introduced in a separate EIP.
• EXTDELEGATECALL (DELEGATECALL replacement) from an EOF contract to a legacy contract is disallowed, and it should fail in the same mode as if the call depth check failed. We allow legacy to EOF path for existing proxy contracts to be able to use EOF upgrades.

For a legacy contract:

• If the target account of EXTCODECOPY is an EOF contract, then it will copy up to 2 bytes from EF00, as if that would be the code.
• If the target account of EXTCODEHASH is an EOF contract, then it will return 0x9dbf3648db8210552e9c4f75c6a1c3057c0ca432043bd648be15fe7be05646f5 (the hash of EF00, as if that would be the code).
• If the target account of EXTCODESIZE is an EOF contract, then it will return 2.

Rationale

EVM and/or account versioning has been discussed numerous times over the past years. This proposal aims to learn from them. See “Ethereum account versioning” on the Fellowship of Ethereum Magicians Forum for a good starting point.

Execution vs. creation time validation

This specification introduces creation time validation, which means:

• All created contracts with EOFn prefix are valid according to version n rules. This is very strong and useful property. The client can trust that the deployed code is well-formed.
• In the future, this allows to serialize JUMPDEST map in the EOF container and eliminate the need of implicit JUMPDEST analysis required before execution.
• Or to completely remove the need for JUMPDEST instructions.
• This helps with deprecating EVM instructions and/or features.
• The biggest disadvantage is that deploy-time validation of EOF code must be enabled in two hard-forks. However, the first step (EIP-3541) is already deployed in London.

The alternative is to have execution time validation for EOF. This is performed every single time a contract is executed, however clients may be able to cache validation results. This alternative approach has the following properties:

• Because the validation is consensus-level execution step, it means the execution always requires the entire code. This makes code merkleization impractical.
• Can be enabled via a single hard-fork.
• Better backwards compatibility: data contracts starting with the 0xEF byte or the EOF prefix can be deployed. This is a dubious benefit, however.

The MAGIC

1. The first byte 0xEF was chosen because it is reserved for this purpose by EIP-3541.

2. The second byte 0x00 was chosen to avoid clashes with three contracts which were deployed on Mainnet:
   • 0xca7bf67ab492b49806e24b6e2e4ec105183caa01: EFF09f918bf09f9fa9
   • 0x897da0f23ccc5e939ec7a53032c5e80fd1a947ec: EF
   • 0x6e51d4d9be52b623a3d3a2fa8d3c5e3e01175cd0: EF
3. No contracts starting with 0xEF bytes exist on public testnets: Goerli, Ropsten, Rinkeby, Kovan and Sepolia at their London fork block.

NOTE: This EIP MUST NOT be enabled on chains which contain bytecodes starting with MAGIC and not being valid EOF.

EOF version range start with 1

The version number 0 will never be used in EOF, so we can call legacy code EOF0. Also, implementations may use APIs where 0 version number denotes legacy code.

Section structure

We have considered different questions for the sections:

• Streaming headers (i.e. section_header, section_data, section_header, section_data, ...) are used in some other formats (such as WebAssembly). They are handy for formats which are subject to editing (adding/removing sections). That is not a useful feature for EVM. One minor benefit applicable to our case is that they do not require a specific “header terminator”. On the other hand they seem to play worse with code chunking / merkleization, as it is better to have all section headers in a single chunk.
• Whether to have a header terminator or to encode number_of_sections or total_size_of_headers. Both raise the question of how large of a value these fields should be able to hold. A terminator byte seems to avoid the problem of choosing a size which is too small without any perceptible downside, so it is the path taken.
• (EOF1) Whether to encode section sizes as fixed 16-bit values or some kind of variable length field (e.g. LEB128). We have opted for fixed size, because it simplifies client implementations, and 16-bit seems enough, because of the currently exposed code size limit of 24576 bytes (see EIP-170 and EIP-3860). Should this be limiting in the future, a new EOF version could change the format. Besides simplifying client implementations, not using LEB128 also greatly simplifies on-chain parsing.
• Whether or not to have more structure to the container header for all EOF versions to follow. In order to allow future formats optimized for chunking and merkleization (verkleization) it was decided to keep it generic and specify the structure only for a specific EOF version.

Data-only contracts

See section Lack of EXTDATACOPY in EIP-7480.

EOF1 contracts can only DELEGATECALL EOF1 contracts

Currently contracts can selfdestruct in three different ways (directly through SELFDESTRUCT, indirectly through CALLCODE and indirectly through DELEGATECALL). EIP-3670 disables the first two possibilities, however the third possibility remains. Allowing EOF1 contracts to only DELEGATECALL other EOF1 contracts allows the following strong statement: EOF1 contract can never be destructed. Attacks based on SELFDESTRUCT completely disappear for EOF1 contracts. These include destructed library contracts (e.g. Parity Multisig).

Backwards Compatibility

This is a breaking change given that any code starting with 0xEF was not deployable before (and resulted in exceptional abort if executed), but now some subset of such codes can be deployed and executed successfully.

The choice of MAGIC guarantees that none of the contracts existing on the chain are affected by the new rules.

Security Considerations

With the anticipated EOF extensions, the validation is expected to have linear computational and space complexity. We think that the validation cost is sufficiently covered by:

• EIP-3860 for initcode,
• high per-byte cost of deploying code.

Copyright

Copyright and related rights waived via CC0.

Citation

Please cite this document as:

Alex Beregszaszi (@axic), Paweł Bylica (@chfast), Andrei Maiboroda (@gumb0), Matt Garnett (@lightclient), "EIP-3540: EOF - EVM Object Format v1 [DRAFT]," Ethereum Improvement Proposals, no. 3540, March 2021. [Online serial]. Available: https://eips.ethereum.org/EIPS/eip-3540.